Art.No.:
Manufacturer:Scorpion

Scorpion HKII-4225-610KV Limited Edition

perfekt für Goblin 630, das Kraftpaket für 600-650er Helis bis 12S Lipo, 5770 Watt, 610KV, 130 Ampere...

Delivery time: 
 
small quantity
 Stück 
Add to cart

Der HK4225-610 Limited Edition ist ein absolutes Kraftpaket für die 600er 3D Heli Klasse mit 12S Antrieb. ER wurde speziell für diesen Zweck in Deutschland entwickelt. Der HK4225-610 wird per Hand gewickelt, was nur eine Produktion von ca. einem Motor pro Tag ermöglicht. Daher ist dies eine streng limitierte Auflage, die nur bei ausgewählten Scorpion Premium Händlern verfügbar ist.
 
 Stator Durchmesser: 42 mm (1.65 in)
 Stator Dicke: 25 mm (0.98 in)
 Stator Arme: 12
 Stator Pole: 8
 Motor Windung: 10 Turn Delta
 Motor Windungskabel: 1-Strand 1.4 mm
 Motor Kv: 610KV Umdrehungen/Volt
 Strom ohne Last (Io/10V): 2.33 Amps
 Motorwidestand(RM): 0.013 Ohms
 Maximale Dauerstrom: 80 Amps
 Maximale Dauerleistung: 3550 Watts
 Motordurchmesser: 52.3 mm (2.02 in)
 Wellendurchmesser: 5.98 mm (0.24 in)
 Gehäuselänge: 51.5 mm (2.07 in)
 Wellenlänge: 91.5 mm (3.63 in)
 Max Lipozellen: 12s
 Maximaler Dauerstrom: 130Amps (5 seconds)
 Maximale Dauerleistung: 5770 Watts (5 seconds)
 Motor Timing: 5deg
 Motor Frequenz: 8kHz
 Gewicht: 390g 
 

The Scorpion HKII-4225-610* Limited Edition motor for use on 600 class helicopters running on 12-cell Li-Po power. This motor represents the most technologically advanced power source ever offered for a 600 class electric helicopter. Each of the new HKII-4225 Limited Edition motor is wound with a single strand of 1.4mm wire for the highest possible efficiency. This motor is capable of running continuously at an input power of 3550 watts at 80 amps, and can handle peak inputs of 5770 watts and 130 amps.

Scorpion Competition Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold Electro-Plated to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are rated for operation at 200 degrees C (392 F), making a motor that is virtually impossible to burn up in normal use.

Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

For the best overall combination of quality, performance, and value, use Scorpion Motors in your helicopter!

*This motor is using 30mm bolt spacing on the mounting

Specifications

Stator Diameter

42 mm (1.65 in)

Stator Thickness

25 mm (0.98 in)

No. of Stator Arms

12

No. of Stator Poles

10

Motor Wind

10 Turn Delta

Motor Wire

1-Strand 1.4 mm

Motor Kv

610KV RPM/Volt

No-Load Current (Io/10V)

2.33 Amps

Motor Resistance (RM)

0.013 Ohms

Max Continuous Current

80 Amps

Max Continuous Power

3550 Watts

Weight

393 Grams (13.77 oz)

Outside Diameter

52.3 mm (2.06 in)

Shaft Diameter

5.98 mm (0.24 in)

Body Length

51.50 mm (2.03 in)

Overall Shaft Length

91.5 mm (3.60 in)

Max Lipo Cell

12s

Max Peak Current

130 Amps (5 seconds)

Max Peak Power

5770 Watts (5 seconds)

Motor Timing

5deg

Drive Frequency

8kHz

Included in the Box

* Gold connectors are not soldered nor included

Weight including packaging

550g


Your cart: 0 Products 0,00 €
 
 
 
 
Your basket is empty.

Draw products in this panel or use the corresponding buttons [Buy now] to fill your basket.