Scorpion HKII-2206-3900KV (2.5mm Shaft)

motor is specifically designed for the newer micro helicopters, such as the T250 and GAUI-EP255 - primarily designed for Helicopter and Ducted Fan use, they do not include a prop adapter.

* Neu bei WOH *
inkl. MwSt (16%)zzgl. Versandkosten
kleine Menge

scorpion-power-systems.pngSCORPION HKII-2206-3900

Motoren der HK-22er Serie sind speziell für kleinere Flächenmodelle, kleinere Impeller und Helikopter der 450er Klasse entwickelt worden. Perfekt für TREX 250 & Gaui EP255. Gegenüber der S-22 Serie sind sie deutlich höher drehend. Die Motoren der HK-22 Serie verfügen über 9 Statorarme und 6 Pole. Sie sind doppelt kugelgelagert, verfügen über eine austauschbare 3,17mm Welle und können ausschließlich hinter dem Kopfspant / Motorträger montiert werden.

Technische Daten:
Scorpion: HKII-2206-3900KV
Stator Durchmesser: 22.0 mm
Stator Stärke: 6.0 mm
Stator Arme: 9
Pole: 6
Windungen: 24 Turn Delta
Draht: 7-Strand 0.19 mm
U/min/V: 3900
Leerlauf (Io): 0.83 A @ 6 V
Widerstand (Rm): 0.064 Ohm
Belastbarkeit: 14A
Max Leistung: 150 W
Gewicht: 31.6g
Durchmesser: 27.9 mm
Welle: 2.5 mm
Motorlänge: 22.6 mm
Wellenlänge: 32.6 mm
Max. Lipo Zellen: 3S
Motor Timing: 5deg
Motor Frequenz: 8kHz




Scorpion HK Series 22mm motors come with 3.5mm male Bullet style connectors already attached, and include a hardware package that contains 3 matching female Bullet connectors for your speed controller, heatshrink to cover the bullet connectors and mounting screws. Since the HK series motors are primarily designed for Helicopter and Ducted Fan use, they do not include a prop adapter. This HK2206-3900KV motor is specifically designed for the newer micro helicopters, such as the T250 and GAUI-EP255*.

Scorpion HK Series Brushless Motors are built from the best materials available, and are designed to provide both quality and performance at an affordable price. Scorpion starts with high quality aluminum alloy parts that are produced on the latest CNC milling machines. These parts are then gold anodized to provide a beautiful, long-lasting finish. The stators are made with 0.2mm laminations to give maximum efficiency, and minimum Eddy current losses. The stators are epoxy coated to prevent shorts, and are wound with wire that is rated at 180 degrees C (356 F). The magnets used in Scorpion Motors are custom manufactured to be able to withstand temperatures of up to 200 degrees C (392 F).

Scorpion Motors are built to last, and are backed with a 2-Year warranty against defects in materials or workmanship. However, due to the high RPM of these motors, and the fact that we cannot control the installation and setup, the bearings are not covered by the 2-Year warranty, nor is any subsequent damage caused to the motor by a bearing failure. Bearings are a normal wear item, and as such, need to be maintained and changed periodically. For maximum life, make sure that a sufficient gap is left between the pinion and main gear during motor installation to avoid binding, and put a small drop of oil on each bearing every 5-6 flights. It is the responsibility of the pilot to ensure that the bearings are maintained properly.

* For GAUI EP-255, customers are required to use a 2.5mm Pinion Gear with this motor.

Stator Diameter: 22.0 mm (0.87 in)
Stator Thickness: 6 mm (0.24 in)
No. of Stator Arms: 9
Magnet Poles: 6
Motor Wind: 24 Turn Delta
Motor Wire: 7-Strand 0.19mm
Motor Kv: 3900 RPM / Volt
No-Load Current (Io): 0.83 Amps @ 6 volts
Motor Resistance (Rm): 0.064 Ohms
Max Continuous Current: 14 Amps
Max Continuous Power: 150 Watts
Weight: 31.6 Grams (1.11 oz)
Outside Diameter: 27.9 mm (1.098 in)
Shaft Diameter: 2.5 mm (0.098 in)
Body Length: 22.6mm (0.89 in)
Overall Shaft Length: 32.6 mm (1.28 in)
Max Lipo Cell: 3s
Motor Timing: 5deg
Drive Frequency: 8kHz

Included in the Box
1 x Scorpion HKII-2206-3900KV Motor
3 x Female Connectors
3 x Heat Shrink
4 x M3 Screws

Ihr Warenkorb: 0 Produkte 0,00 €
Ihr Warenkorb ist noch leer.

Ziehen Sie Produkte hierher oder nutzen Sie die entsprechenden Buttons [Jetzt Kaufen] um Ihren Warenkorb zu füllen.